Description
Our in-field hydraulic hose repair clamps have made hydraulic hose repair as simple as possible, with no removal of the hose from the machine. You can be up and running in as little 10 minutes. The clamps can be used on most types of hydraulic hose eliminating the need to have different fittings for different types of hose.
The hosepatch kit is a revolutionary emergency hydraulic hose repair kit. The kit is designed to allow the user to patch the hose “in the field” and keep moving until a new hydraulic hose can be made. The Hosepatch kit is a re-usable tool that comes in a convenient carry case with all 5 sizes (1/4, 3/8, 1/2, 3/4, and 1″).
TWO WAYS TO USE THE CLAMPS
Hose Patch hydraulic hose repair clamps can be used in two different ways.
AS A PATCH
The clamp can be used as a patch for simple repairs. You place the clamps over the leakage in the hose, making sure the hole is placed centre of the clamp and then tighten the bolts. You’re ready to go. Use as a patch has its limitations and best suits pressures under 2000 psi, small holes, where the hose is in relatively good condition.
AS A JOINER
Using the clamp as a joiner requires the use of the joining barb that comes in the kit, which means the hose has to be cut. The advantages of using as a joiner are that condition isn’t important and can be used at pressures up to 6000 psi.
AFTER REPAIR
Hose Patch clamps are designed as a temporary repair and are completely reusable. It is best to replace the damaged hose as soon as possible and return the clamp to the kit for next use.
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 1 × 1 × 1 in |
Related Products
Quick View
1/2″ NPT REUSEABLE BREATHER
1/2" NPT REUSEABLE BREATHER. PERFECT FOR CYLINDERS AND HYDRAULICS
Quick View
1/2 NPT DIRECTIONAL VALVE
1/2" Port size, 2 ports in 4 ports out. Double selection valve diverts the flow of hydraulic oil to two separate circuits.
